Horizontal Lifelines
Horizontal Lifeline Systems
Manufactured of synthetic rope or wire rope, FCP's horizontal lifeline systems allow one or two workers (up to 310 lbs. each) to remain tied off while in horizontal transition between two anchor points. The lifelines can be anchored by anchorage connector straps, D-bolt anchors, anchor plates, or other compatible anchorage connectors. The line tensioner on the rope system is used for line adjustment and proper tension. Wire rope systems use a turn buckle and combination clamp to achieve proper adjustment and tension. All Horizontal Lifelines come in standard lengths of 30' or 60'.
RHL-30
30' temporary rope HLL with tensioner, tie off straps, and carry bucket.
RHL-60
60' temporary rope HLL with tensioner, tie off straps, and a carry bucket. Lifeline is shown.
RHLD-30
30' temporary, low stretch rope HLL with in line shock absorber, tensioner, tie off straps, and carry bucket. Lifeline is shown.
RHLD-60
60' temporary, low stretch rope HLL with in line shock absorber, tensioner, tie off straps, and carry bucket.
CHL-30
30' temporary wire rope HLL with in line shock absorber, tie off straps, connectors, and carry bucket.
CHL-60
60' temporary wire rope HLL with in line shock absorber, tie off straps, connectors, and carry bucket. Lifeline is shown.
RHL-60 system in use.