Home|Aboutfcp|Products|Contact|Info|New

LANYARDS

Designing the perfect lanyard is as easy as 1...2...3 with FrenchCreek. Just pick:

• 1. the basic style from the categories listed below.
• 2. the options needed.
• 3. the snap required for tie-off end

EXAMPLE: An (450) single leg web lanyard (A) shock absorber (B) adjustable = 450AB

Letters designating options are added to the Lanyards

A	B	D	S*	R
Shock Absorber	Adjustable (Available only  on the web lanyards)	Sliding dee Assembly	Stretch Web	Pouch containing a 16' rescue ladder. Can be added to any lanyards configuration

*NOTE: Only available in 6 ft length and options "B" and "D" can not be used with the Stretch Web. 

Return to top

*Must be used with a shock absorber for fall protection

400 Series Single leg 1/2" rope  

400	400A
1/2"  Multiline rope lanyard. Available in any length.	1/2" Multiline rope lanyard w/shock absorber. Available in any length.

410/411 Series 5/8" rope lifelines

410	411
5/8" Multiline rope lifelines, w/snaps both ends, for use with the #1201 and #1301 Rope grabs. Available in any length. Standard lengths: 25', 50', 100'	5/8" Multiline rope lifelines, w/snap one end, thimble other end, for use with the #1201 and #1301 Rope grabs. Available in any length. Standard lengths: 25', 50', 100'

440 Series Dual leg webbing

450 Series Single leg webbing

450	450A	450AS	450AB
1" single leg web lanyard w/o shock absorber.  May be used for positioning only.	1" single leg web lanyard w/shock absorber. May be used for fall protection.	1-3/8" single leg stretch web lanyard w/shock absorber.  May be used for fall protection. Available only in 6' length.	1" single leg adjustable web lanyard w/shock absorber. May be used for fall protection.

460 Series Single leg tubular shock absorbing webbing

460A	460AS
Tubular shock absorbing lanyard. Available in 4' to 10' only. NOTE:  This lanyard may not be tied back into itself.	Tubular shock absorbing stretch lanyard.  Available in  4' to 10' only. NOTE:  This lanyard may not be tied back into itself.

456AW	446AW
Lanchor The "Lanchor Series" lanyards are designed to tie back onto themselves, providing an extremely accommodating and adaptable means of anchoring when other equipment or options may not be available.  Made with "double-tuff" synthetic webbing and a super-strong (5,000 lb) snap hook, the Lanchor is a tie-off strap and a shock absorbing lanyard all in one!  Available in single leg and due leg configurations.

470 & 480 Series Single and Dual leg Cable 

470A	480A
Single leg lanyard of 9/32" Vinyl covered aircraft cable w/shock absorber.	Dual leg lanyard of 9/32" Vinyl covered aircraft cable w/shock absorber.

490 Series Single leg 1-3/4" webbing

490A	490A-DL
Single Leg Web Lanyard w/shock absorber.  Made of 1-3/4" wide webbing with #74 locking snaps on each end.	Dual Leg Web Lanyard w/shock absorber.  Made of 1-3/4" wide webbing with #74 locking snaps on each end.

355 Series Loop top shock absorbing webbing

355A	355-Shock	355-Leg
6' Lanyard with #74 snap one end and large loop on shock end to chock to dee. If lanyard is cut or worn, it may be cut off and replaced with the 355-Leg.	Shock pack with large loop one end to chock to dee, small loop other end to chock 355-Leg into.	Replacement leg with #74 snap one and and loop to chock to shock other
The 355A is the complete 6' lanyard with shock absorber. The 355-Shock and 355-Leg are the replacement parts or may be combined to make a dual leg lanyard.

459 Retractable Lanyard

Return to top

HARDWARE

459

9 ft Webbing Retractable Lanyard complete w/Carabiner. State of the art in fall arrest technology is highly recommended where durability and high mobility are essential.  A spring keeps a slight constant tension on the lanyard, thus keeping it from dragging and eliminating the tripping hazard.  Should a fall be detected, an internal braking system engages and arrests the fall.  A free fall situation is virtually nonexistent with this unit.  the unit ic covered by a durable, highly visible vinyl jacket to extent service life.

Any of the hardware can be used on the tie-off end of any Lanyard or Rebar Assembly. The third digit of the part number denotes the snap used and is the number in parentheses beside each piece of hardware. Example: 446A-double leg web lanyard with #63 (6) snaps the tie-off end of both legs.

	(6)	(2)	(0)
#62 Captive eye carabiner, 2" throat opening	#63 Twist lock snap, 3/4" throat opening	#69 Locking snap, 1-3/4" throat opening	#74N locking snap, 5/8" throat opening (Standard)
(7)	(4)
#135 Locking snap, 2-1/2" throat opening	#136 Locking snap, 2-1/4" throat opening	#354-1 Twist lock Carabiner, 1/2" throat opening	#354-2 Twist lock Carabiner, 1" throat opening